FOX Float

Vilica: FOX Float 36 Rhytm, Grip Damper, 2-stopenjska nastavite, 15x110mm QR axle, 44mm offset, 160mm hoda

The Fox Float 36 Rhythm eMTB is a mid-tier suspension fork tailored for electric mountain bikes, designed to offer robust performance and long-term durability in demanding trail conditions. As part of the Fox 36 series, it blends the brand’s hallmark chassis stiffness with simplified internal architecture to ensure cost-effectiveness without compromising reliability.

Installing the Float 36 Rhythm [paid link] requires standard tools and procedures applicable to modern threadless steerer forks. However, attention to specific torque values and alignment is crucial for optimal performance. Begin by cutting the steerer tube to fit your frame’s head tube and cockpit setup. Install a star nut (for alloy steerers) or insert for carbon steerers. Grease the steerer lightly, then slide the fork into the head tube with spacers and stem in place. Tighten the top cap and stem bolts to align the fork and preload the headset bearings properly.

Routine maintenance is essential to preserve the performance and extend the life of the Float 36 Rhythm fork. Fox recommends lower leg service every 30-50 hours of ride time and full damper rebuilds every 125-150 hours. Lower leg service involves removing the lower legs, cleaning stanchions, replacing wiper seals if needed, and refilling with specified suspension oil volumes. Grease all seals with Fox Float Fluid [paid link] or equivalent before reassembly. Torque all bolts to specification, and confirm proper fork function before riding.